Leash Electronics Sportsman 6 Relay Wiring Board

Leash Electronics Sportsman 6 Relay Wiring Board is designed to handle the basic electrical needs for most race cars all in one convenient location. Six built in 35 amp relays with ATC style fused outputs with optional positive or ground activation triggers. Connect your switch panel to the wiring board and control your race cars electrical devices.

Outputs are labeled with Ignition, Starter, Fuel, H2O, Fan and Lights designations – but of course you can use them for other functions if needed. Input strip has 12 volt and ground output to power your switch panel. It even includes a Transbrake Relay for faster release and compatibility with bump boxes or EFI controllers.

• Six 35 Amp Mechanical relays
• Dedicated Transbrake Relay
• Circuit Indicator LEDs
• 1/4″ Power and Ground Studs
• #10 Output Studs
• Uses ATC Style Fuses (not included)

Important – Make sure to select if you need any of the relays to be negative triggered (mean if you have a specific purpose to use a ground to turn a relay on) If you have no need for any negative triggers then select ZERO in the options. Note that if you choose any Negative triggers there will be an arm wire that disables the Negative trigger relays until 12 volts is applied to the extra wire. This wire will apply to all the negative triggered relays only. If you want any negative triggered circuits you must select how many in the drop-down option.