LSM Canted or Splayed Shaft Rocker Spring Compressor SC-200

LSM’s SC-200 is designed for Canted or Splayed style heads with Shaft Mount Rockers (individual rockers – no offset intakes). Slotted Steel Base for 5/16″ bolts or studs with 1.40″ – 1.70″ center line spacing. Remove rocker and mount right on the stand!

All LSM on head Valve Spring Compressors have a tapered flange retainer housing that can fit springs as small as .800″ and up to 1.600″. And they can easily and safely handle 1,000 pounds of seat pressure with our screw down method that will not spin back. Plus, you won’t need an extra set of hands so you don’t lose your keepers. No need to take off the pedestals – our compressors bolt right to the stands!

For use on –

• Big Block Chevy: Jesel, T&D, Crower
• Brodix SR-20: T&D only (Jesel needs SC-515 or SC-520)
• Chevy V6: Jesel, T&D
• Cleveland Ford: Jesel, T&D
• Ford A-460: Jesel, T&D
• Ford C-460: exhaust only w/T&D, Jesel (SC-500 int.)
• Ford Yates C3: Jesel, T&D
• P-5 Dodge: Jesel
• SB2: T&D or Jesel (straight rockers – no offset intakes like Big Chief style)

Note: Different base required for Jesel J2K Rockers on SB2, SC1, and P7. Use LSM SC-400

Note: if you don’t see your combination listed, contact us and we’ll find the right spring compressor for you.