SAVE 5%
Strange Evolution Dynamic Drive Mount Rear Brake Kit For Late Big Ford / Torino Housing Ends Evolution S Rotors, 4 Piston Billet Evolution 4 Calipers With DTC-30 Semi Metallic Pads
3.350 Housing End Dim
Strange Evolution Dynamic Drive Mount Rear Brake Kit For Late Big Ford / Torino Housing Ends Evolution S Rotors, 4 Piston Billet Evolution 4 Calipers With DTC-30 Semi Metallic Pads
3.350 Housing End Dim

Strange Evolution Rear Brake Kit For 3.350″ Symmetrical Housing Ends, Stainless Rotors, Four Piston Calipers – Strange B1711WCE

Original price was: $1,095.00.Current price is: $1,095.00. Pair - Free Shipping $1,040.25

Strange Engineering Evolution Rear Brake Kit for 3.350″ Symmetrical Housing Ends with 2.832″ Offset. Features Evolution S Dynamic Drive Mount (DDM) Stainless Steel Rotors, Billet Aluminum DDM Hats, Four Piston Billet Evolution 4 Calipers, Billet Aluminum Caliper Mounts and DTC-30 Semi Metallic Brake Pads.

REQUIRES

  • H1136 housing ends or equivalent
  • 2.832″ brake offset
  • Ball style axle bearings (Caliper mount relief isn’t correct for tapered bearings)

  • Upgrade To Evolution 4 Low Profile Calipers – B5080 Increases Caliper to Wheel Clearance for Beadlocks or other tight fit situations. Reduces OD of rear caliper assembly diameter by .354″. - Changes OD from 13.014" STD to 12.660" Low Profile.

SKU: SE-B1711WCE Category: Tags: , , ,

Evolution S Dynamic Drive Mount (DDM) Stainless Steel Rotors – B2798L / B2798R

  • Evolution S Rotor mounts to Billet Aluminum DDM Hat – reducing rotating weight
  • DDM system secures the rotor and allows for rotor thermal expansion – drastically reducing warping, coning, and cracking which are common with bolt retention designs
  • DDM system design is secured by an internal Spirlox, eliminating heavy bolts and hardware- further reducing rotating weight
  • Evolution S rotors are machined and fully ground from Stainless Steel that exhibits 48% greater yield strength at 1,000° F compared to carbon steel- further maintaining rotor integrity
  • Stainless steel Evolution S rotors are highly resistant to heat and corrosion
  • Unique Aero Slot design reduces rotating weight and promotes even heat dissipation- compared to common round drilled holes
  • Scalloped design further reduces rotating weight
  • 11.250″ OD / .355″ thickness

Four Piston Billet Evolution 4 Calipers – B1900

  • Stainless steel pistons mitigate heat transfer to brake fluid
  • Reverse dish pressure vessel piston maximizes stiffness
  • High retraction piston and O-ring design to eliminate drag during acceleration
  • Computer finite element analysis (FEA) optimized and field-tested calipers – Evolution 4 design improves piston retraction, pedal feel, and stiffness resulting in improved pad wear and exemplary braking efficiency
  • All pistons are 1.750″ for increased clamping force

Billet Aluminum Caliper Mounts

  • One piece design eliminates spacers & bolts that require periodic maintenance

Housing End Stud Kit H1135STKIT

  • Additional components that are not supplied in most aftermarket systems

DTC-30 Semi Metallic Brake Pads – B5010

  • Provides the best starting-line cold holding power
  • Recommended for vehicles going 150 MPH or less in the 1/4 mile
Weight26 lbs
Dimensions12 × 12 × 11 in
Manufacturer

Strange Engineering

Reviews

There are no reviews yet.

Be the first to review “Strange Evolution Rear Brake Kit For 3.350″ Symmetrical Housing Ends, Stainless Rotors, Four Piston Calipers – Strange B1711WCE”