Wheel Studs | 1/2″-20 chrome moly studs in 2″ Long A1025, 1/2″-20 chrome moly studs in 3" Long A1026, 5/8"-18 x 3" Sleeve Style Stud Kit w/.250" Thick Washers A1027S, 5/8"-18 x 3" Sleeve Style Stud Kit w/.438" Thick Washers A1027, 5/8"-18 x 3" Sleeve Style Stud Kit w/.688" Thick Washers A1027L |
---|---|
Bolt Pattern | 5 x 4.5", 5 x 4.75", 5 x 5", Other |
Splines | 31 Spline, 33 Spline, 35 Spline |
Strange Pro Race 31,33 or 35 Spline Axle Kit for 86-93 8.8 Mustang Drum Rear End with C-Clip Eliminators P1011F86/P1011F8658
$599.00 – $649.00
$569.05 – $616.55 Kit
Strange Engineering 31. 33 or 35 Spline Pro Race Axle Kit for 1986-1993 Mustang 8.8 Rear End with C-Clip Eliminator Kit and 1/2″ or 5/8″ Wheel Studs. This kit works with aftermarket disc brakes or OEM Drum Brakes.
A1000 Hy-Tug Ultra Strength Axles
- Forged from low carbon, high manganese, high nickel, and high molybdenum steel
- Majority of machining performed before heat treat to provide consistent hardness
- Thru hardened to Rc 45-48 to maximize the material’s torsional strength
- Finish machined after heat treat to ensure accuracy
- Choice of 31, 33, or 35 spline
- Custom lengths available at no additional charge
- Choice of bolt circle
- Designed and machined by Strange Engineering
- Forged in the USA
Choice of Screw-in Wheel Studs in either 1/2″ or 5/8″
- Screw-in 1/2″-20 chrome moly studs in 2″ or 3″ long
- Screw-in 5/8-18 x 3″ Long Fully Threaded with Optional Washer Thickness
- Screw-in studs include .060″ hardened washers
- Length is measured from underneath the hex of the stud
C-Clip Eliminator Kit – A1090
- Billet aluminum inner and outer halves
- Timken® Tapered Unit bearings for long bearing life
- Locking rings
- Outer seals
- Gaskets
- Grade 8 studs with locking nuts & washers
Be the first to review “Strange Pro Race 31,33 or 35 Spline Axle Kit for 86-93 8.8 Mustang Drum Rear End with C-Clip Eliminators P1011F86/P1011F8658” Cancel reply
You must be logged in to post a review.
Reviews
There are no reviews yet.