$55.00 Each
Leash Electronics Dual 35 amp relay module with small platform mount. 35 amp industrial heavy duty relays with ATC Style Blade Fuses (NOT INCLUDED).
Can be setup to be triggered by positive or negative input signal.
This dual 35amp relay board features 2 industrial 35amp relays.
This board also allows access to both sides of the relay coils (+ and -). This gives you the option of triggering the relays with 12/16 volts or triggering with a ground. If you’re triggering with 12 volts from a switch then you connect your switch to the positive + input and connect a ground to the negative – input. If you’re triggering with a ground signal, then you connect your ground signal to the negative – input and connect the positive input + to a 12-volt source.
The LED lights will light up anytime 12 volts are applied to the positive + and ground is applied to the negative – inputs.
The Fuses are standard ATC Blade fuses available at most auto parts stores.
The + and – inputs use small fork terminals.
Batt + terminal uses 1/4” ring terminals and the outputs use #10 ring terminals.
You must be logged in to post a review.
Reviews
There are no reviews yet.