Dual Master Cylinder

1.032″ Bore Dual Master Cylinder Kit with Reinforcing Plates – Strange B3360

$118.00 Each

Strange Engineering 1.032 (1″) Bore Light Weight Aluminum Dual Master Cylinder Kit for cars with front and rear disc brakes generates equal pressure from both ports. A adjustable pressure regulator is highly recommended to set your front and rear brake pressure as needed.

Kit Includes

Aluminum Master Cylinder With Plastic Reservoir

  • 1.032″ bore size
  • 1/2″-20 Ports
  • Cast aluminum body anodized for corrosion resistance
  • Flange for firewall mounting – 21/64″ holes on 3.187″ centers
  • Provisions for side mounting – .390″ holes on 5 1/2″ centers
  • 1/2″-20 brake line holes with brass inverted flare seats

Additional Components

  • 3/8″-24 x 4.200″ long push-rod
  • Push-rod locking grommet
  • Dust boot to protect piston bore
  • 1/2″-20 brass inverted flare adapters for 3/6″ brake line
  • 3/16″ brake line nuts
  • Two firewall reinforcing plates
  • Two 5/16″-18 x 1.75″ bolts
  • One 5/16″-18 x 1.25″ bolts
  • Three 5/16″-18 Nylock nuts
SKU: SE-B3360 Category: Tag:

Master Cylinder Application Notes

  • When using with all Wheel Disc brakes use a 2 lb residual pressure valves if mounted at or below the level of the calipers.
  • When Using With Drum Brakes – any line supplying drum brakes will require a 10 lb residual pressure valve.
  • 5.5 to 1 pedal ratio recommended for best results.
  • The port closest to the push-rod (rear) flows the most volume of fluid, this port needs to be plumbed to the brakes requiring more capacity
  • Silicone Brake Fluid Not Recommended.
Weight3.25 lbs
Dimensions8 × 8.5 × 4.5 in
Manufacturer

Strange Engineering

Reviews

There are no reviews yet.

Be the first to review “1.032″ Bore Dual Master Cylinder Kit with Reinforcing Plates – Strange B3360”