Leash Electronics Billet Sportsman 6 Relay Wiring Board is designed to handle the basic electrical needs for most race cars all in one convenient location. Six built in 35 amp relays with ATC style fused outputs with optional positive or ground activation triggers. Connect your switch panel to the wiring board and control your race cars electrical devices. Outputs are labeled with Ignition, Starter, Fuel, H2O, Fan and Lights designations – but of course you can use them for other functions if needed. It even includes a Solid State Transbrake Relay for faster release and compatibility with bump boxes or EFI controllers.
Housed in a compact, but strong billet aluminum case, the Sportsman Wiring Board has a Black Powder Coating for Corrosion Protection.
Six 35 Amp Mechanical relays
Solid State Transbrake Relay
Circuit Indicator LEDs
1/4″ Power and Ground Studs
#10 Output Studs
Uses ATC Style Fuses (not included)
Black Powder Coated Billet Aluminum Case
Important – Make sure to select if you need any of the relays to be negative triggered (mean if you have a specific purpose to use a ground to turn a relay on) If you have no need for any negative triggers then select ZERO in the options. Note that if you choose any Negative triggers there will be an arm wire that disables the Negative trigger relays until 12 volts is applied to the extra wire. This wire will apply to all the negative triggered relays only. If you want any negative triggered circuits you must select how many in the drop-down option.
Designed for 6 input wires from your switch panel plus a transbrake button switch input. Input strip has 12 volt and ground output designed to connect to your power switch panel. Ignition box connections include: 12 volt ignition power, tach signal, launch(2-step) and burnout(3-step). Outputs for gauge power, ground, gauge lights, and tach signal. Fused outputs for transbrake, line lock, and brake lights.
There are no reviews yet.